Where to get Car Replacement Camshaft Position Sensors – July 2022 edition

Looking to find the best Car Replacement Camshaft Position Sensors?

We researched 28 Car Replacement Camshaft Position Sensors, tested 10, and we have done 28 hours of research. The best Car Replacement Camshaft Position Sensors doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
Camshaft Position Sensor PHASE Set of 2 - Compatible with Nissan and Infiniti 3.5L, 4.0L V6 Altima, Maxima, 350Z, Pathfinder, FX35, G35, QX45 - Replaces 23731-AL61A, 917-704, 237316J90B, 907-716
  • Replacement Bank 1 & 2 Camshaft Position Sensors Set of 2 - The camshaft position sensors determines the rotating position of the camshaft to regulate spark timing and fuel injector operation in sync with the crankshaft sensors. This set replaces the bank 1 passenger side and bank 2 driver side camshaft sensors of your vehicle.
  • Compatible Replacement for Nissan & Infiniti Vehicles - 2003 - 2008 FX35 | 2003 - 2007 G35 | 2002 - 2004 I35 | 2006 - 2008 M35 | 2004 - 2010 QX56 | 2003 - 2007 350Z 3.5L | 2002 - 2006 Altima 3.5L | 2005 - 2012 Frontier 4.0L | 2002 - 2008 Maxima | 2003 - 2007 Murano | 2012 NV1500, NV2500, NV3500 | 2005 - 2012 Pathfinder 4.0: | 2005 - 2009 Quest 3.5L | 2005 - 2012 Xterra 4.0L |.
  • Replaces Part# Bank 1 Sensor : 907-716, 237316J90B, 23731-6J906, 23731-6J905, 237316J900, 237315M016, 237315M015, 237315M010 | Bank 2 Sensor : 917-704, 23731-AL61A, 23731AL616, 23731AL615, 23731AL610, 237317Y001, 237317Y000. The sensor that has an angled connector is the bank 2 sensor. These sensors can easily be located behind the engine near the firewall. Bank 1 is on the passenger side and Bank 2 ( Angled Sensor ) is located on the driver side of the engine depending on the vehicle model.
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory camshaft position sensors. If you are experiencing rough idle, hard to start, stalling, hesitation, decrease in engine performance and a check engine light with codes P0340 & P0345, then you may have to replace your camshaft position sensors.
  • Lifetime Warranty - This replacement camshaft position sensor kit of 2 comes complete with a lifetime warranty. If the part ever fails on your vehicle including year models 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 simply contact us for a replacement. Save time and money off of dealer prices by purchasing this part from AA Ignition.

Intro

Find out where you can get the best Car Replacement Camshaft Position Sensors! Picking among different existing Car Replacement Camshaft Position Sensors is not always that easy. It can even turn into a lengthy task because of the multiplicity of websites offering this type of product. That’s why on this page we’re giving you a comparison based on the best value for money spent. It’s a ranking thoroughly made to provide you with a comprehensive view and allow you to pick the best Car Replacement Camshaft Position Sensors. You will find a broad selection of models, brands, and prices. Whether you want to spare your wallet or find out what will be the best Car Replacement Camshaft Position Sensors for you, we support you through this comparison, which lists the product based on Amazon customer reviews. To make it practical, we have laid it out as a Top 10 of the Car Replacement Camshaft Position Sensors. On your marks! Start comparing! Pick your Car Replacement Camshaft Position Sensors!

Our picks

No. 1
Camshaft Position Sensor PHASE Set of 2 - Compatible with Nissan and Infiniti 3.5L, 4.0L V6 Altima, Maxima, 350Z, Pathfinder, FX35, G35, QX45 - Replaces 23731-AL61A, 917-704, 237316J90B, 907-716
  • Replacement Bank 1 & 2 Camshaft Position Sensors Set of 2 - The camshaft position sensors determines the rotating position of the camshaft to regulate spark timing and fuel injector operation in sync with the crankshaft sensors. This set replaces the bank 1 passenger side and bank 2 driver side camshaft sensors of your vehicle.
  • Compatible Replacement for Nissan & Infiniti Vehicles - 2003 - 2008 FX35 | 2003 - 2007 G35 | 2002 - 2004 I35 | 2006 - 2008 M35 | 2004 - 2010 QX56 | 2003 - 2007 350Z 3.5L | 2002 - 2006 Altima 3.5L | 2005 - 2012 Frontier 4.0L | 2002 - 2008 Maxima | 2003 - 2007 Murano | 2012 NV1500, NV2500, NV3500 | 2005 - 2012 Pathfinder 4.0: | 2005 - 2009 Quest 3.5L | 2005 - 2012 Xterra 4.0L |.
  • Replaces Part# Bank 1 Sensor : 907-716, 237316J90B, 23731-6J906, 23731-6J905, 237316J900, 237315M016, 237315M015, 237315M010 | Bank 2 Sensor : 917-704, 23731-AL61A, 23731AL616, 23731AL615, 23731AL610, 237317Y001, 237317Y000. The sensor that has an angled connector is the bank 2 sensor. These sensors can easily be located behind the engine near the firewall. Bank 1 is on the passenger side and Bank 2 ( Angled Sensor ) is located on the driver side of the engine depending on the vehicle model.
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory camshaft position sensors. If you are experiencing rough idle, hard to start, stalling, hesitation, decrease in engine performance and a check engine light with codes P0340 & P0345, then you may have to replace your camshaft position sensors.
  • Lifetime Warranty - This replacement camshaft position sensor kit of 2 comes complete with a lifetime warranty. If the part ever fails on your vehicle including year models 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 simply contact us for a replacement. Save time and money off of dealer prices by purchasing this part from AA Ignition.
No. 2
Hitachi CPS0008 Engine Camshaft Position Sensor
  • Tier 1 OE supplier for sensors
  • 100% NEW, never remanufactured
  • Meets the OE performance and durability standards for this application
  • Fast and accurate measurements
  • Reliable engine management
No. 3
Dorman 907-722 Engine Camshaft Position Sensor Compatible with Select Ford / Lincoln / Mercury Models
241 Reviews
Dorman 907-722 Engine Camshaft Position Sensor Compatible with Select Ford / Lincoln / Mercury Models
  • Direct replacement - this camshaft position sensor matches the fit and performance of the original equipment sensor
  • Durable construction - this part is manufactured to exacting standards to ensure reliable performance and durability
  • Cost-effective solution - offers original equipment quality at a competitive price
  • Plug & play installation - no special tools required
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 28 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Car Replacement Camshaft Position Sensors information.
As for me, I’m very familiar with the Car Replacement Camshaft Position Sensors since I got it from 3 years.

Top 10

No. 1
Camshaft Position Sensor PHASE Set of 2 - Compatible with Nissan and Infiniti 3.5L, 4.0L V6 Altima, Maxima, 350Z, Pathfinder, FX35, G35, QX45 - Replaces 23731-AL61A, 917-704, 237316J90B, 907-716
  • Replacement Bank 1 & 2 Camshaft Position Sensors Set of 2 - The camshaft position sensors determines the rotating position of the camshaft to regulate spark timing and fuel injector operation in sync with the crankshaft sensors. This set replaces the bank 1 passenger side and bank 2 driver side camshaft sensors of your vehicle.
  • Compatible Replacement for Nissan & Infiniti Vehicles - 2003 - 2008 FX35 | 2003 - 2007 G35 | 2002 - 2004 I35 | 2006 - 2008 M35 | 2004 - 2010 QX56 | 2003 - 2007 350Z 3.5L | 2002 - 2006 Altima 3.5L | 2005 - 2012 Frontier 4.0L | 2002 - 2008 Maxima | 2003 - 2007 Murano | 2012 NV1500, NV2500, NV3500 | 2005 - 2012 Pathfinder 4.0: | 2005 - 2009 Quest 3.5L | 2005 - 2012 Xterra 4.0L |.
  • Replaces Part# Bank 1 Sensor : 907-716, 237316J90B, 23731-6J906, 23731-6J905, 237316J900, 237315M016, 237315M015, 237315M010 | Bank 2 Sensor : 917-704, 23731-AL61A, 23731AL616, 23731AL615, 23731AL610, 237317Y001, 237317Y000. The sensor that has an angled connector is the bank 2 sensor. These sensors can easily be located behind the engine near the firewall. Bank 1 is on the passenger side and Bank 2 ( Angled Sensor ) is located on the driver side of the engine depending on the vehicle model.
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory camshaft position sensors. If you are experiencing rough idle, hard to start, stalling, hesitation, decrease in engine performance and a check engine light with codes P0340 & P0345, then you may have to replace your camshaft position sensors.
  • Lifetime Warranty - This replacement camshaft position sensor kit of 2 comes complete with a lifetime warranty. If the part ever fails on your vehicle including year models 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 simply contact us for a replacement. Save time and money off of dealer prices by purchasing this part from AA Ignition.
No. 2
Hitachi CPS0008 Engine Camshaft Position Sensor
  • Tier 1 OE supplier for sensors
  • 100% NEW, never remanufactured
  • Meets the OE performance and durability standards for this application
  • Fast and accurate measurements
  • Reliable engine management
No. 3
Dorman 907-722 Engine Camshaft Position Sensor Compatible with Select Ford / Lincoln / Mercury Models
241 Reviews
Dorman 907-722 Engine Camshaft Position Sensor Compatible with Select Ford / Lincoln / Mercury Models
  • Direct replacement - this camshaft position sensor matches the fit and performance of the original equipment sensor
  • Durable construction - this part is manufactured to exacting standards to ensure reliable performance and durability
  • Cost-effective solution - offers original equipment quality at a competitive price
  • Plug & play installation - no special tools required
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
No. 4
ACDelco 213-363 GM Original Equipment Engine Camshaft Position Sensor
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
No. 5
ACDelco 213-1690 GM Original Equipment Engine Camshaft Position Sensor
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
No. 6
MOSTPLUS 2PCS CPS Camshaft Position Sensor Compatible for BMW Z4 740I 528I 328I Replace 13627525014 13627546660 13627558518
  • Fitment(1): Compatible with 2014-2016 435i M235i Rolls-Royce Wraith,Compatible with 2016 340i,Compatible with 2015-2016 Alpina B6 M3 M4 X4,Compatible with 2008-2016 535i X6,Compatible with 2012-2016 640i 650i xDrive,Compatible with 2006-2016 550i 750i Z4,Compatible with 2013-2016 640i ActiveHybrid 5 M5 M6,Compatible with 2006-2010 2012-2016 650i,Compatible with 2011-2016 740i,Compatible with 2007-2016 X3 X5,Compatible with 2012 2014-2016 Rolls-Royce Ghost,Compatible with 2007-2015 335i
  • Fitment(2): Compatible with 2010-2015 760Li,Compatible with 2011-2015 740Li Alpina B7,Compatible with 2013-2015 740Li X1,Compatible with 2006-2015 750Li,Compatible with 2008-2013 128i 135i,Compatible with 2013 320i,Compatible with 2007-2013 328i,Compatible with 2011-2013 335is,Compatible with 2008-2011 528i,Compatible with 2006-2010 323i,Compatible with 2007-2008 328xi 335xi,Compatible with 2006-2007 525i 525xi 530i 530xi,Compatible with 2006 325Ci 325i 325xi 330i 330xi
  • OEM Part Number: 13627525014 13627546660 13627558518 S119445001Z 6PU09 121-011 19270 (Please check your car information with Compatibility Garage or OEM number before purchase)
  • Stock parts direct replacement; 100% test before shipment; The key parts including chip from top supplier
  • 2 x Camshaft position sensor, 2 x O Ring
SaleNo. 7
X AUTOHAUX S119701 Car Engine Camshaft Position Sensor Replacement for Nissan Tiida Versa
  • Reference OE Number: S119701
  • The item fits for Nissan Tiida 2013, for Nissan Versa 2009-2017.
  • Manufactured to good quality standards, directly match your vehicle, stable performance, high reliability.
  • Direct Replacement for the Factory Part.Just Need to Remove the Original Sensor and Install.
  • Note: Please carefully check your vehicle year/make/model and OE number with our description and pictures before purchasing.
No. 8
Hitachi CPS0005 Engine Camshaft Position Sensor
  • Tier 1 OE supplier for sensors
  • 100% NEW, never remanufactured
  • Meets the OE performance and durability standards for this application
  • Fast and accurate measurements
  • Reliable engine management
SaleNo. 9
CAM Camshaft Position Sensor Fits 13627546660 Compatible with BMW 1Series M 128i 135i 528i 535i X6 325i 325xi 330i 330xi 328i 335i 750i 550i 650i 750Li / ZBN


  • ▲▲▲Cautions: Carefully check fitment of Amazon, list description and part pictures. Must make sure our part pictures are same as yours. Because The first two could not identify vehicle months & engine difference. If pictures (body,socket,plugs) are same, certainly the part will fit your car. Or If you have part no., please make sure the part no. is among our Interchange part number list. If yes, the part usually fits your car. So the pictures or part no. are more important.
  • ▲▲▲Please carefully check the connector and plug on our pictures with your old part, make sure they are same before your purchase. Or it will cause Compatibility problem and return issue easily.
  • ▲▲▲12 Months warranty. If any problem in the year quality warranty time, pls not hesitate to contact us for a free and easy replacement or refund.any wrong purchase.And pls keep the package in good condition if you want to return it.
  • ▲▲▲Part Number Fitment: 13627525014 13627546660 13627558518 13627633958
  • ▲▲▲CAM Camshaft Position Sensor Fits 13627546660 Compatible With BMW 1Series M 128i 135i 528i 535i X6 325i 325xi 330i 330xi 328i 335i 750i 550i 650i 750Li
SaleNo. 10
Motorcraft DU70 Cam Position Sensor
  • Ensures long lasting durability
  • Reliable under extreme conditions
  • Made of high quality material
  • Resists fatigue failure
  • Offers superior service life

How we tested

We search all the field to find the best Car Replacement Camshaft Position Sensors and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Car Replacement Camshaft Position Sensors from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Car Replacement Camshaft Position Sensors and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Car Replacement Camshaft Position Sensors from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
X AUTOHAUX S119701 Car Engine Camshaft Position Sensor Replacement for Nissan Tiida Versa
  • Reference OE Number: S119701
  • The item fits for Nissan Tiida 2013, for Nissan Versa 2009-2017.
  • Manufactured to good quality standards, directly match your vehicle, stable performance, high reliability.
  • Direct Replacement for the Factory Part.Just Need to Remove the Original Sensor and Install.
  • Note: Please carefully check your vehicle year/make/model and OE number with our description and pictures before purchasing.
SaleNo. 2
CAM Camshaft Position Sensor Fits 13627546660 Compatible with BMW 1Series M 128i 135i 528i 535i X6 325i 325xi 330i 330xi 328i 335i 750i 550i 650i 750Li / ZBN


  • ▲▲▲Cautions: Carefully check fitment of Amazon, list description and part pictures. Must make sure our part pictures are same as yours. Because The first two could not identify vehicle months & engine difference. If pictures (body,socket,plugs) are same, certainly the part will fit your car. Or If you have part no., please make sure the part no. is among our Interchange part number list. If yes, the part usually fits your car. So the pictures or part no. are more important.
  • ▲▲▲Please carefully check the connector and plug on our pictures with your old part, make sure they are same before your purchase. Or it will cause Compatibility problem and return issue easily.
  • ▲▲▲12 Months warranty. If any problem in the year quality warranty time, pls not hesitate to contact us for a free and easy replacement or refund.any wrong purchase.And pls keep the package in good condition if you want to return it.
  • ▲▲▲Part Number Fitment: 13627525014 13627546660 13627558518 13627633958
  • ▲▲▲CAM Camshaft Position Sensor Fits 13627546660 Compatible With BMW 1Series M 128i 135i 528i 535i X6 325i 325xi 330i 330xi 328i 335i 750i 550i 650i 750Li
SaleNo. 3
Motorcraft DU70 Cam Position Sensor
  • Ensures long lasting durability
  • Reliable under extreme conditions
  • Made of high quality material
  • Resists fatigue failure
  • Offers superior service life
SaleNo. 4
ACDelco GM Original Equipment 213-3826 Engine Camshaft Position Sensor
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function

Conclusion

We hope this ranking has been helpful to you in picking the Car Replacement Camshaft Position Sensors that best suits you. We made it thoroughly and we will update it just as seriously, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, and get an overview of the current market offers. We are here to make it easier for you and to help you make a free and informed choice. If our ranking gave you a clearer view on the diversity of the Car Replacement Camshaft Position Sensors, feel free to let us know in the comments section. We will happily read them.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2022-07-04 at 22:41 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment