Where to get Phillips Head Drive Sockets – May 2022 edition

Looking to find the best Phillips Head Drive Sockets?

We researched 20 Phillips Head Drive Sockets, tested 10, and we have done 27 hours of research. The best Phillips Head Drive Sockets doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
TEKTON 3/8 Inch Drive x #2 Phillips Bit Socket | SHB11202
52 Reviews
TEKTON 3/8 Inch Drive x #2 Phillips Bit Socket | SHB11202
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
  • Tip geometry is machined to precise tolerances for an exact fit with Phillips fasteners
  • Large, clear die-stamped size marking is easy to read and can’t wear off
  • Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
  • Overall Length: 1.9 in., Shaft Diameter: 0.25 in., Drive End Diameter: 0.8 in., Exposed Bit Length: 0.8 in.

Intro

Find out where you can get the best Phillips Head Drive Sockets! Picking among different existing Phillips Head Drive Sockets is not always that easy. It can even turn into a lengthy task because of the multiplicity of websites offering this type of product. That’s why on this page we’re giving you a comparison based on the best value for money spent. It’s a ranking thoroughly made to provide you with a comprehensive view and allow you to pick the best Phillips Head Drive Sockets. You will find a broad selection of models, brands, and prices. Whether you want to spare your wallet or find out what will be the best Phillips Head Drive Sockets for you, we support you through this comparison, which lists the product based on Amazon customer reviews. To make it practical, we have laid it out as a Top 10 of the Phillips Head Drive Sockets. On your marks! Start comparing! Pick your Phillips Head Drive Sockets!

Our picks

No. 1
TEKTON 3/8 Inch Drive x #2 Phillips Bit Socket | SHB11202
52 Reviews
TEKTON 3/8 Inch Drive x #2 Phillips Bit Socket | SHB11202
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
  • Tip geometry is machined to precise tolerances for an exact fit with Phillips fasteners
  • Large, clear die-stamped size marking is easy to read and can’t wear off
  • Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
  • Overall Length: 1.9 in., Shaft Diameter: 0.25 in., Drive End Diameter: 0.8 in., Exposed Bit Length: 0.8 in.
No. 2
TEKTON 1/4 Inch Drive Phillips/Slotted Bit Socket Set, 8-Piece (#0-#3, 1/8-5/16 in.) | SHB90104
  • Includes 4-pc. 1/4 in. drive slotted bit sockets: 1/8, 3/16, 1/4, 5/16 in.; 4-pc. 1/4 in. drive Phillips bit sockets: #0, #1, #2, #3; Socket rail
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
  • Bits tips are machined to precise tolerances for strong engagement with fastener heads
  • Large, clear die-stamped size marking is easy to read and can’t wear off
  • Four detent grooves provide a secure connection with the drive tool
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
  • Twist-to-Lock Socket Rail organizes and securely holds sockets in place, both for in your toolbox and on the go
No. 3
TEKTON 3/8 Inch Drive Phillips/Slotted Bit Socket Set, 8-Piece (#0-#3, 1/8-5/16 in.) | SHB91105
  • Includes 4-pc. 3/8 in. drive slotted bit sockets: 1/8, 3/16, 1/4, 5/16 in.; 4-pc. 3/8 in. drive Phillips bit sockets: #0, #1, #2, #3; Socket rail
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
  • Bits tips are machined to precise tolerances for strong engagement with fastener heads
  • Large, clear die-stamped size marking is easy to read and can’t wear off
  • Four detent grooves provide a secure connection with the drive tool
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
  • Twist-to-Lock Socket Rail organizes and securely holds sockets in place, both for in your toolbox and on the go

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 27 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Phillips Head Drive Sockets information.
As for me, I’m very familiar with the Phillips Head Drive Sockets since I got it from 2 years.

Top 10

No. 1
TEKTON 3/8 Inch Drive x #2 Phillips Bit Socket | SHB11202
52 Reviews
TEKTON 3/8 Inch Drive x #2 Phillips Bit Socket | SHB11202
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
  • Tip geometry is machined to precise tolerances for an exact fit with Phillips fasteners
  • Large, clear die-stamped size marking is easy to read and can’t wear off
  • Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
  • Overall Length: 1.9 in., Shaft Diameter: 0.25 in., Drive End Diameter: 0.8 in., Exposed Bit Length: 0.8 in.
No. 2
TEKTON 1/4 Inch Drive Phillips/Slotted Bit Socket Set, 8-Piece (#0-#3, 1/8-5/16 in.) | SHB90104
  • Includes 4-pc. 1/4 in. drive slotted bit sockets: 1/8, 3/16, 1/4, 5/16 in.; 4-pc. 1/4 in. drive Phillips bit sockets: #0, #1, #2, #3; Socket rail
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
  • Bits tips are machined to precise tolerances for strong engagement with fastener heads
  • Large, clear die-stamped size marking is easy to read and can’t wear off
  • Four detent grooves provide a secure connection with the drive tool
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
  • Twist-to-Lock Socket Rail organizes and securely holds sockets in place, both for in your toolbox and on the go
No. 3
TEKTON 3/8 Inch Drive Phillips/Slotted Bit Socket Set, 8-Piece (#0-#3, 1/8-5/16 in.) | SHB91105
  • Includes 4-pc. 3/8 in. drive slotted bit sockets: 1/8, 3/16, 1/4, 5/16 in.; 4-pc. 3/8 in. drive Phillips bit sockets: #0, #1, #2, #3; Socket rail
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
  • Bits tips are machined to precise tolerances for strong engagement with fastener heads
  • Large, clear die-stamped size marking is easy to read and can’t wear off
  • Four detent grooves provide a secure connection with the drive tool
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
  • Twist-to-Lock Socket Rail organizes and securely holds sockets in place, both for in your toolbox and on the go
No. 4
TEKTON 1/4 Inch Drive x #2 Phillips Bit Socket | SHB01202
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
  • Tip geometry is machined to precise tolerances for an exact fit with Phillips fasteners
  • Large, clear die-stamped size marking is easy to read and can’t wear off
  • Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
  • Overall Length: 1.5 in., Shaft Diameter: 0.25 in., Drive End Diameter: 0.5 in., Exposed Bit Length: 0.7 in.
No. 5
uxcell 1/4" Drive x PH2 Phillips Bit Socket, S2 Steel Bits, CR-V Sockets 1.5" Length (For Hand Use Only) 5pcs
  • 【Size】1/4-inch drive socket, PH2 (#2) phillips bit, 1.5-inch (38mm) total length.
  • 【Durable】Quenched and heat treated S2 alloy steel bits, hardness arrived at 58-62 HRC, reduce wear-outs. High strength chrome vanadium steel sockets, increase turning power.
  • 【Torque Strength】Complete rust and corrosion resistance with nickel plated finish sockets and roasted red bits treatment.
  • 【Precision Bits】Automatically processe bit tips to ensure accurate size, chamfered ends insert smoothly into fastener head, reducing wear.
  • 【Ideal Tools】Use with ratchet to improve speed in tightening phillips drive fasteners. And the product has no insulation properties and is not suitable for electrical environments.
SaleNo. 6
NEIKO 03043A Right Angle 1/4-Inch Drive Mini Ratchet Wrench Screwdriver Bit and Socket Set | 17-Piece Set | Cr-V Steel | Dual Head | Low Profile | 90 Degree | Sockets, Phillips, Slotted, & Torx Star
  • [LOW PROFILE]: This mini ratchet wrench has a 5.5-inch-long handle with an offset 90-degree angle ratchet driver is exceptional for working in small, close quarters spaces.
  • [REVERSIBLE]: Quick reverse thumb lever and a 12-teeth reversible ratcheting mechanism allows switching between clockwise and counterclockwise operation.
  • [DURABLE]: All bits and sockets are constructed of chrome vanadium steel for extra strong durability and resistance to tool wear-out.
  • [DUAL HEAD]: The mini hand ratchet has a dual head design to allow a socket and driver bit simultaneously to cover fastening needs without having to go back to the toolbox.
  • [INCLUDES]: Mini ratchet and bit set comes with (2) organizers with common sized sockets, flatheads, screwdrivers, and torx star bits: 1/4-Inch Drive Sockets - 3/16, 1/4, 5/16, 11/32, 3/8-inch | 1/4-Inch Drive Bits - Phillips (#1, #2), slotted (5mm, 6mm), and Torx Star (T8, T10, T15, T20, T25, T27, T30)
No. 7
TEKTON 1/2 Inch Drive x #3 Phillips Bit Socket | SHB21203
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
  • Tip geometry is machined to precise tolerances for an exact fit with Phillips fasteners
  • Large, clear die-stamped size marking is easy to read and can’t wear off
  • Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
  • Overall Length: 2.2 in., Shaft Diameter: 0.31 in., Drive End Diameter: 1 in., Exposed Bit Length: 0.7 in.
No. 8
Prime-Line 9000496 Machine Screws, Flat Head, Phillips Drive, #6-32 X 3/8 in, Grade 18-8 Stainless Steel, 25-Pack
  • Size: #6-32 X 3/8 inch
  • Flat Head, Phillips Drive
  • Use with nuts or pre-threaded holes of the same diameter & thread size
  • Often used in machinery & appliances
  • Nuts and washers not included
SaleNo. 9
DEWALT 3/8" Bit Socket PH2 - DWMT75447B
  • Full Polish Chrome Vanadium Finish
  • Knurled Rings
No. 10
DEWALT DWMT75422OSP 3/8" Drive Screw Driver Bit Socket Set
  • Directtorque technology
  • Polished chrome vanadium finish
  • Hand stamped markings
  • Knurled control ring
  • Limited lifetime warranty

How we tested

We search all the field to find the best Phillips Head Drive Sockets and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Phillips Head Drive Sockets from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Phillips Head Drive Sockets and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Phillips Head Drive Sockets from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
NEIKO 03043A Right Angle 1/4-Inch Drive Mini Ratchet Wrench Screwdriver Bit and Socket Set | 17-Piece Set | Cr-V Steel | Dual Head | Low Profile | 90 Degree | Sockets, Phillips, Slotted, & Torx Star
  • [LOW PROFILE]: This mini ratchet wrench has a 5.5-inch-long handle with an offset 90-degree angle ratchet driver is exceptional for working in small, close quarters spaces.
  • [REVERSIBLE]: Quick reverse thumb lever and a 12-teeth reversible ratcheting mechanism allows switching between clockwise and counterclockwise operation.
  • [DURABLE]: All bits and sockets are constructed of chrome vanadium steel for extra strong durability and resistance to tool wear-out.
  • [DUAL HEAD]: The mini hand ratchet has a dual head design to allow a socket and driver bit simultaneously to cover fastening needs without having to go back to the toolbox.
  • [INCLUDES]: Mini ratchet and bit set comes with (2) organizers with common sized sockets, flatheads, screwdrivers, and torx star bits: 1/4-Inch Drive Sockets - 3/16, 1/4, 5/16, 11/32, 3/8-inch | 1/4-Inch Drive Bits - Phillips (#1, #2), slotted (5mm, 6mm), and Torx Star (T8, T10, T15, T20, T25, T27, T30)
SaleNo. 2
DEWALT 3/8" Bit Socket PH2 - DWMT75447B
  • Full Polish Chrome Vanadium Finish
  • Knurled Rings
SaleNo. 3
MulWark 20pc 1/4 Ultra Low Profile Mini Ratchet Wrench Close Quarters Screwdriver Set with High Torque - Right Angle EDC Tool with 90 Degree Mini Offset Reversible Drive Handle & Multi Hex Bits Set
  • ▲ COMPACT SIZE: The 4" long 3/8" thick driver handle is small enough for operation in confined places/ tight spaces/ tight spot where traditional bit driver, traditional ratcheting screwdriver or stubby screwdriver might be too large or bulky to fit, rendering easy fastening and unfastening with sufficient torque, especially in awkward places like U shape corner, lateral surface, etc.
  • ▲ DELICATE MECHANISM: This multi tip right angled combination screwdriver set is powered with a 16-teeth reversible ratchet system to ensure smooth ratcheting in both directions and enable precision adjustment; and the miniature pocket size close-quarters bit driver has magnetic like clip inside the hex bit holder help keep the inserted bit tight in position
  • ▲ COMPATIBLE FOR VARIOUS USAGE: The lightweight magnetic bit adaptor with higher levels of torque accepts any 1/4 inch hex bits of all styles. This whole set performs well in confined locations on machines, cars, boats, plane, RV, etc., or for household or work with “tight fit” repairs, installations or renovations, making it good to have around as part of an EDC and also a nice gift for professional handymen and do-it-yourselfers; this can also be transferred to a ratchet socket using an adapte
  • ▲ 19pc POPULAR-SIZE BITS: Made of heavy duty CRV6150 (chrome vanadium) steel with hardness of HRC51-55, these bits include: - 6pcs 25mm (1”) driver bits: #1, #2, #3 phillips head bits; 4.5mm, 7mm slotted head bits; #2 square head bits; -13pcs 20mm driver bits: 3mm, 4mm, 5mm, 6mm hex head bits; #1, #2 pozidriv head bits; #1, #2, #3 phillips head bits; 6mm slotted head bits; T15, T20, T25 security torx star screwdriver bits; coming with a cartridge as a good screwdriver bit organizer
  • ▲ LIFETIME WARRANTY: All MulWark tools are warranted to be free of defects in materials and workmanship for as long as you own the product, you may return this product free of charge with original purchase receipt or choose to get a replacement
SaleNo. 4
Stalwart - 75-5216 16 Piece Precision Jewelers Tool Set Metallic
  • 12 Pieces of Magnetic Tipped Precision Screwdrivers
  • 4 pieces Phillips #000, #00, #0, #1
  • 8 piece Star(Torx) T6, T8, T9, T10 115mm
  • Long Nose Pliers 125mm Needle Nose Pliers 100mm Diagonal Pliers 115mm Bent Nose Pliers
  • 1 sturdy nylon case

Conclusion

We hope this ranking has been helpful to you in picking the Phillips Head Drive Sockets that best suits you. We made it thoroughly and we will update it just as seriously, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, and get an overview of the current market offers. We are here to make it easier for you and to help you make a free and informed choice. If our ranking gave you a clearer view on the diversity of the Phillips Head Drive Sockets, feel free to let us know in the comments section. We will happily read them.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2022-05-19 at 19:31 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment