Where to get Powersports Handlebar Risers – September 2021 edition

Looking to find the best Powersports Handlebar Risers?

We researched 23 Powersports Handlebar Risers, tested 6, and we have done 11 hours of research. The best Powersports Handlebar Risers doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
HONGK- 1'' inch Spike Handlebar Risers Compatible with Harley Cruisers Choppers Metrics Victory CHROMED [B01BN0EQSC]
  • Hole Diameter: 1"
  • Width: 1 3/4"
  • Total Height: 5 1/4"
  • Height from bottom to center of hole: 2 1/4"
  • Bottom Thread Mount: 10mm Coarse,Bolts included: 10mm Coarse Thread 2 3/4" Length,,THIS SET IS MADE FOR 1 INCH HANDLEBARS ONLY,These are aftermarket risers and will not fit on some models,Inspect your bikes design and determine if these will fit before purcashing.,Bolts included - 10mm Coarse Thread 2 3/4" Length,Use the measurements above to determine if the risers will fit,No Installation guide

Intro

Find out where you can get the best Powersports Handlebar Risers! Picking among different existing Powersports Handlebar Risers is not always that easy. It can even turn into a lengthy task because of the multiplicity of websites offering this type of product. That’s why on this page we’re giving you a comparison based on the best value for money spent. It’s a ranking thoroughly made to provide you with a comprehensive view and allow you to pick the best Powersports Handlebar Risers. You will find a broad selection of models, brands, and prices. Whether you want to spare your wallet or find out what will be the best Powersports Handlebar Risers for you, we support you through this comparison, which lists the product based on Amazon customer reviews. To make it practical, we have laid it out as a Top 10 of the Powersports Handlebar Risers. On your marks! Start comparing! Pick your Powersports Handlebar Risers!

Our picks

No. 1
HONGK- 1'' inch Spike Handlebar Risers Compatible with Harley Cruisers Choppers Metrics Victory CHROMED [B01BN0EQSC]
  • Hole Diameter: 1"
  • Width: 1 3/4"
  • Total Height: 5 1/4"
  • Height from bottom to center of hole: 2 1/4"
  • Bottom Thread Mount: 10mm Coarse,Bolts included: 10mm Coarse Thread 2 3/4" Length,,THIS SET IS MADE FOR 1 INCH HANDLEBARS ONLY,These are aftermarket risers and will not fit on some models,Inspect your bikes design and determine if these will fit before purcashing.,Bolts included - 10mm Coarse Thread 2 3/4" Length,Use the measurements above to determine if the risers will fit,No Installation guide
SaleNo. 2
PowerMadd 45590 Black 5"-8" Handlebar Risers
  • "fits both wide and narrow "t" steering posts"
  • "3" of adjustability"
  • adjusts quickly
  • includes all mounting hardware
  • easy install
  • Fit type: Vehicle Specific
SaleNo. 3
Xitomer 22mm 7/8" Motorcycle Handlebar Risers With Clamps, ATV Dirt Bike Motocross, Fit for Honda Grom MSX125/ CRF250L, Yamaha FZ1/ FZ8/ FZ16, Kawasaki KLR650/ Z125, Suzuki DRZ 400/S MT-03(Black)
  • Perfect Fit for 7/8" 22mm Handlebars; (Please Make Sure the Size of Your Handlebar fit well before Buying It.) NOT Fit for 1" or 1+1/8" (They are Available in Other Listings of Our Shop), or 1+1/4".
  • Provides 25.8 mm (1 ") Higher, 20 mm (0.787") Backward and Forward Position from Stock Handlebar Position. Please Make Sure the Stock Wiring, Brake Hose, Brake Clutch Cable Length will work well before buying the riser. Of Course, It also Depends on Your Most Comfortable Riding Position.
  • Solid Construction But Light Weight: CNC Machined by Billet 6063-T6 Aluminum, and Anodized Surface Finish.
  • Easy to Install: Just Screw Out with the Allen Wrench, Each Package Comes with 4 PCS SUS304 Bolts to Screw the risers on (Size M8*1.25 Pitch).
  • Fit OEM Hole Center Size: 32mm(1.2598")-36mm(1.4173").

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 11 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Powersports Handlebar Risers information.
As for me, I’m very familiar with the Powersports Handlebar Risers since I got it from 2 years.

Top 10

No. 1
HONGK- 1'' inch Spike Handlebar Risers Compatible with Harley Cruisers Choppers Metrics Victory CHROMED [B01BN0EQSC]
  • Hole Diameter: 1"
  • Width: 1 3/4"
  • Total Height: 5 1/4"
  • Height from bottom to center of hole: 2 1/4"
  • Bottom Thread Mount: 10mm Coarse,Bolts included: 10mm Coarse Thread 2 3/4" Length,,THIS SET IS MADE FOR 1 INCH HANDLEBARS ONLY,These are aftermarket risers and will not fit on some models,Inspect your bikes design and determine if these will fit before purcashing.,Bolts included - 10mm Coarse Thread 2 3/4" Length,Use the measurements above to determine if the risers will fit,No Installation guide
SaleNo. 2
PowerMadd 45590 Black 5"-8" Handlebar Risers
  • "fits both wide and narrow "t" steering posts"
  • "3" of adjustability"
  • adjusts quickly
  • includes all mounting hardware
  • easy install
  • Fit type: Vehicle Specific
SaleNo. 3
Xitomer 22mm 7/8" Motorcycle Handlebar Risers With Clamps, ATV Dirt Bike Motocross, Fit for Honda Grom MSX125/ CRF250L, Yamaha FZ1/ FZ8/ FZ16, Kawasaki KLR650/ Z125, Suzuki DRZ 400/S MT-03(Black)
  • Perfect Fit for 7/8" 22mm Handlebars; (Please Make Sure the Size of Your Handlebar fit well before Buying It.) NOT Fit for 1" or 1+1/8" (They are Available in Other Listings of Our Shop), or 1+1/4".
  • Provides 25.8 mm (1 ") Higher, 20 mm (0.787") Backward and Forward Position from Stock Handlebar Position. Please Make Sure the Stock Wiring, Brake Hose, Brake Clutch Cable Length will work well before buying the riser. Of Course, It also Depends on Your Most Comfortable Riding Position.
  • Solid Construction But Light Weight: CNC Machined by Billet 6063-T6 Aluminum, and Anodized Surface Finish.
  • Easy to Install: Just Screw Out with the Allen Wrench, Each Package Comes with 4 PCS SUS304 Bolts to Screw the risers on (Size M8*1.25 Pitch).
  • Fit OEM Hole Center Size: 32mm(1.2598")-36mm(1.4173").
No. 4
Pivoting Handlebar Clamp Risers - APE Racing Billet Aluminum Universal Motorcycle 2" Raise Clamps For 7/8" or 1 1/8" Handlebars Mount To 7/8" Stem Clamp
  • ✔️HEAVEY DUTY - Made of billet 6061-T6 aluminum with completely CNC machined, hard anodized and blasting surface treatemt. We DON'T USE CASTING aluminum.
  • ✔️POLYMER ADAPTERS - APE Racing featured handlebar adapter made by high performance polymer which gives you the option of using either 7/8"(with adapter) bars or 1-1/8"(without adapter) taper bars.
  • ✔️RELIABLE AND DURABLE - APE Racing risers are designed for tough application. Each riser have 4 high grade stainless steel bolts to make sure max life time and safety.
  • ✔️FITMENT - 2 inch raise height; Fit for any machine with 7/8" bar clamps. ⚠️Please check the right size before purchase.
  • ✔️INCLUDES - 1 pair pivoting handlebar riser with adapters and 1 L-key wrench. Shipped in APE RACING retail packaging.
No. 5
kemimoto 7/8" Handlebar Risers 30mm Height for KLR650 ATV Dirt Bike (Black)
  • Perfect Fit for 7/8 inch Handlebars; NOT FIT FOR 1" or 1 1/8" (They are available in our shop too), or 1 1/4". Please Make Sure the Size of Your Handlebar before Placing Order. There is "Application Manual " at Technical Specification
  • Adaptation - These motorcycle handlebar risers fit almost all Dirt Bikes and Atv with 7/8" handlebars. Such as KLR 650, ATV, Dirt Bike, F650GS F800ST, etc.
  • High Quality - Our 7/8" risers are made from high-quality CNC aluminum with anti-rust bolts. Extend height, 30mm(1.2 inches)
  • Provide Comfortable - Extend 30mm(1.2 inches) height to provide you a comfortable riding position. Fits well and easy to install.
  • Risers allow you to change the location of the handlebars very easily, raising them up and pulling them back towards you more. Allowing for a more natural and comfortable riding position.
No. 6
Motorcycle Adjustable Pivoting Handlebar Clamp Risers Universal Fit Handle Bar Mount Bracket Clamps Riser Height For 7/8" 22mm or 1 1/8" 28mm Bar Mount Black Universal
  • ★【Universal】: Pivoting risers are incredibly universal that allows them to be clamped on most motor vehicles with 22mm to 28mm handlebar clamps. Fits for 1 1/8" and 7/8" handlebar.
  • ★【Adjustable】: Adjustable by 2 inch (55mm) height, the motorcycle bar riser can greatly increase driving comfort and effectively reduce fatigue during long driving.
  • ★【Benifit】: The motorcycle handlebar risers are made of complete Aluminum Alloy, CNC Machined, it is durable and antirust.
  • ★【Installation 】: The motorcycle riser is easy to install without drilling or welding, just twist the screws, it is convenient and quick, please check the Description for Instruction.
  • ★【Note】: Buy with confidence, If you have any question,please simply contact us for a replacement.THANKS !
No. 7
NEVERLAND 7/8" Handlebar Risers 30mm Height for Kawasaki Honda Suzuki Yamaha Ducati ATV Dirt Bike Black
  • Feature:Handlebar Supports with 30MM height,CNC-machined from high-strength aluminium alloy Premium quality, anodized surface finish
  • Fitment For most bikes with 22mm (7/8") diameter handlebars, these will raise your handlebars by 30mm.such as Kawasaki Honda Suzuki Yamaha Ducati and so on
  • Easy to install,No need to replace your handlebars for a more upright position
  • Heavy Duty- The handlebar risers are made from strong sturdy and reliable anti-rust 6063-T6 Aluminum material
  • 100% Satisfaction Service- If there any problems with the products, reach out to us for a quick solution. If there is any question, please feel free to reach out to us.
No. 8
DiER 2x Handlebar Riser Mount Clamps Motorcycle Dirt Bike ATV 22mm 7/8
  • Package:2x Motorcycle Handlebar Riser Mount.
  • Motorcycle Handlebar Riser Mount.
  • Use for most Motocycles with 22.2mm(7/8") Handlebar Clamp.
No. 9
PowerMadd 45419 Black Handlebar Risers
  • Universal fit
  • One piece design
  • Made of solid aluminum for superior strength
  • dual pivot points provide optimum bar positioning
  • Two models available - 7/8" to 7/8" for standard bars and 7/8" to 1 1/8" for converting to oversize bars
No. 10
Springer Front End Riser Handlebar Tree Adapter Converter Fit Harley Bobber Chopper 4-3/4" to Standard 3-1/2"
  • Adapter with front springer forks and adapts 4-3/4" riser holes to standard 3-1/2".
  • Fitment: aftermarket springer fronts designed to fit on Harley Davidson like DNA, Paughco, MID-USA, and Hard Drive Springers.
  • NOTE: This can not FIT a OEM Harley Davidson springer front end.Check the Desired handlebar thread pitch before install.
  • Made from CNC Machines Billet High Strength Steel with Chrome Finish
  • Package Included: 1x Handlebar Tree Adapter,does not include screws.

How we tested

We search all the field to find the best Powersports Handlebar Risers and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Powersports Handlebar Risers from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Powersports Handlebar Risers and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Powersports Handlebar Risers from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
PowerMadd 45590 Black 5"-8" Handlebar Risers
  • "fits both wide and narrow "t" steering posts"
  • "3" of adjustability"
  • adjusts quickly
  • includes all mounting hardware
  • easy install
  • Fit type: Vehicle Specific
SaleNo. 2
Xitomer 22mm 7/8" Motorcycle Handlebar Risers With Clamps, ATV Dirt Bike Motocross, Fit for Honda Grom MSX125/ CRF250L, Yamaha FZ1/ FZ8/ FZ16, Kawasaki KLR650/ Z125, Suzuki DRZ 400/S MT-03(Black)
  • Perfect Fit for 7/8" 22mm Handlebars; (Please Make Sure the Size of Your Handlebar fit well before Buying It.) NOT Fit for 1" or 1+1/8" (They are Available in Other Listings of Our Shop), or 1+1/4".
  • Provides 25.8 mm (1 ") Higher, 20 mm (0.787") Backward and Forward Position from Stock Handlebar Position. Please Make Sure the Stock Wiring, Brake Hose, Brake Clutch Cable Length will work well before buying the riser. Of Course, It also Depends on Your Most Comfortable Riding Position.
  • Solid Construction But Light Weight: CNC Machined by Billet 6063-T6 Aluminum, and Anodized Surface Finish.
  • Easy to Install: Just Screw Out with the Allen Wrench, Each Package Comes with 4 PCS SUS304 Bolts to Screw the risers on (Size M8*1.25 Pitch).
  • Fit OEM Hole Center Size: 32mm(1.2598")-36mm(1.4173").
SaleNo. 3
Xitomer ADV (1.535" Rise) Handlebar Risers, Fit for BMW R1200GS 2013-2018, R1200GS ADV 2014-2018, R1250GS 2019-2020, R1250GS ADV 2019-2020, S1000XR 2015-2019
  • Fitment: ONLY FIT for R1200GS 2013-2018, R1200GS Adventure 2014-2018, R1250GS 2019 2020, R1250GS Adv 2019 2020, S1000XR 2015-2019.
  • Provides 39 mm (1.535 ") Higher, 25 mm (0.984") Backward or Forward Position from Stock Handlebar Position.
  • Please Make Sure the Stock Wiring, Brake Hose, Brake Clutch Cable Length will Work Well before Buying the Riser.
  • Solid Construction But Light Weight: CNC Machined by Billet 6063-T6 Aluminum, and Anodized Surface Finish.
  • Easy to Install: Just Screw Out with the Allen Wrench, Each Package Comes with 8 PCS SUS304 Bolts to Screw the risers on Size M8*1.25*30 6pcs & M8*1.25*25 2pcs.

Conclusion

We hope this ranking has been helpful to you in picking the Powersports Handlebar Risers that best suits you. We made it thoroughly and we will update it just as seriously, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, and get an overview of the current market offers. We are here to make it easier for you and to help you make a free and informed choice. If our ranking gave you a clearer view on the diversity of the Powersports Handlebar Risers, feel free to let us know in the comments section. We will happily read them.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2021-07-10 at 09:54 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment