Where to get RV Freshwater Tanks Inlets – May 2022 edition

Looking to find the best RV Freshwater Tanks Inlets?

We researched 29 RV Freshwater Tanks Inlets, tested 15, and we have done 27 hours of research. The best RV Freshwater Tanks Inlets doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
A.A Fresh Water Tank Accessory Hose Connection Kit - RV, Concession, Trailer, Camper
  • This Accessory hose kit includes all the hoses required for use with a standard fresh water tank.
  • (1) Water fill intake with large hose fitting and cover, (1) Drainage hose spigot, (2) Large hose clamps for water fill, (5) Small hose clamps for the other hoses, and (3) Small hose fittings/barb-to-screw adapters.
  • (1) 60" long clear hose is used for air and drainage, (1) 36" large ribbed hose is for water filling, (1) 18" reinforced hose goes to your water pump
  • Fits standard tanks with 1.25" water fill port and 3/8" NPT connections.

Intro

Find out where you can get the best RV Freshwater Tanks Inlets! Picking among different existing RV Freshwater Tanks Inlets is not always that easy. It can even turn into a lengthy task because of the multiplicity of websites offering this type of product. That’s why on this page we’re giving you a comparison based on the best value for money spent. It’s a ranking thoroughly made to provide you with a comprehensive view and allow you to pick the best RV Freshwater Tanks Inlets. You will find a broad selection of models, brands, and prices. Whether you want to spare your wallet or find out what will be the best RV Freshwater Tanks Inlets for you, we support you through this comparison, which lists the product based on Amazon customer reviews. To make it practical, we have laid it out as a Top 10 of the RV Freshwater Tanks Inlets. On your marks! Start comparing! Pick your RV Freshwater Tanks Inlets!

Our picks

No. 1
A.A Fresh Water Tank Accessory Hose Connection Kit - RV, Concession, Trailer, Camper
  • This Accessory hose kit includes all the hoses required for use with a standard fresh water tank.
  • (1) Water fill intake with large hose fitting and cover, (1) Drainage hose spigot, (2) Large hose clamps for water fill, (5) Small hose clamps for the other hoses, and (3) Small hose fittings/barb-to-screw adapters.
  • (1) 60" long clear hose is used for air and drainage, (1) 36" large ribbed hose is for water filling, (1) 18" reinforced hose goes to your water pump
  • Fits standard tanks with 1.25" water fill port and 3/8" NPT connections.
No. 2
A.A 1-3/8" Fill Hose with Flats for RV Concession Fresh Water Tank - Marine, Boats, Campers, Trailer, RVs, Concession (3 Feet)
  • 1-3/8" ID Fill Hose with Flats (3 Foot Length) - The last picture shows a 10 ft roll and does not represent shorter lengths - The length will be within +/- 3"
  • This 1-3/8" hose with flats is to be used with hose clamps to connect RV gravity water fill with the RV water tanks (no clamps included). The flats allow for easy clamping.
  • Made from ethylene copolymer (great flexibility with no kinking)
  • IAPMO approved
  • Heavy duty construction
No. 3
Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank
  • 65 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 44.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 27 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed RV Freshwater Tanks Inlets information.
As for me, I’m very familiar with the RV Freshwater Tanks Inlets since I got it from 4 years.

Top 10

No. 1
A.A Fresh Water Tank Accessory Hose Connection Kit - RV, Concession, Trailer, Camper
  • This Accessory hose kit includes all the hoses required for use with a standard fresh water tank.
  • (1) Water fill intake with large hose fitting and cover, (1) Drainage hose spigot, (2) Large hose clamps for water fill, (5) Small hose clamps for the other hoses, and (3) Small hose fittings/barb-to-screw adapters.
  • (1) 60" long clear hose is used for air and drainage, (1) 36" large ribbed hose is for water filling, (1) 18" reinforced hose goes to your water pump
  • Fits standard tanks with 1.25" water fill port and 3/8" NPT connections.
No. 2
A.A 1-3/8" Fill Hose with Flats for RV Concession Fresh Water Tank - Marine, Boats, Campers, Trailer, RVs, Concession (3 Feet)
  • 1-3/8" ID Fill Hose with Flats (3 Foot Length) - The last picture shows a 10 ft roll and does not represent shorter lengths - The length will be within +/- 3"
  • This 1-3/8" hose with flats is to be used with hose clamps to connect RV gravity water fill with the RV water tanks (no clamps included). The flats allow for easy clamping.
  • Made from ethylene copolymer (great flexibility with no kinking)
  • IAPMO approved
  • Heavy duty construction
No. 3
Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank
  • 65 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 44.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
No. 4
Class A Customs | T-1300-SP | One (1) Spouted 13 Gallon RV Fresh and Gray Water Holding Tank RV Concession
  • 13 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS SEE PHOTOS Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • TANK BUILT-IN FITTINGS: (ONE) 1.25" Outer Diameter x 2" Long Boss Fitting (Smooth Pipe / Spout) fitting is open and glue does not stick to pipe, hose with clamp needed (THREE) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
No. 5
Class A Customs | 42 Gallon RV Concession Fresh and Gray Water Holding Tank | T-4200
  • 42 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (THREE) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
No. 6
A.A 30 Gallon RV Fresh/Gray Water Tank 34" x 18" x 12" - BPA Free (30 Gallon)
  • This 30 gallon water tank measures 34" x 18" x 12" (not including fittings)
  • All tanks come with (1) 1.25" water fill inlet and (3) 3/8" NPT connections. Non-Pressurized Tank - The tank must be vented
  • One piece seamless construction - No Seams to burst
  • These rotational molded fresh water tanks are made from a high quality durable polyethylene material.
  • Stain, corrosion and rust resistant features make them ideal for replacement or OEM installation on RVs, horse trailers or marine products.
No. 7
RecPro RV Water Tank | Gray Water Tank | RV Fresh Water Tank | Camper | Trailer (40 Gallon) | Made in America
  • Made in America
  • Please be sure to clean tanks before use
  • All tanks have been pressure tested
No. 8
Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank
  • 75 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 50.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
No. 9
RecPro RV 45 Gallon Fresh Water Holding Tank for Campers, Trailers and RV Tank with Sensors | Made in America
  • The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and thermoformed varieties
  • Blow-molded HDPE tanks are an integral component to all recreational vehicles
  • Tanks are built to standards specified by IAPMO (International Association of Plumbing and Mechanical Officials) and the Canadian Standards Association
  • 27.7 Width x 53.5 Length x 7.5 Height Holding Tank 45 - Gallon, Blow-molded with 3 Inch Coupling
  • Made in America
No. 10
Class A Customs | T-2000 | One (1) RV Fresh Water 20 Gallon Tank, Grey Water
  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
  • WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.

How we tested

We search all the field to find the best RV Freshwater Tanks Inlets and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great RV Freshwater Tanks Inlets from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best RV Freshwater Tanks Inlets and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad RV Freshwater Tanks Inlets from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
RV Camper City/Gravity Water Hatch with Plastic Check Valve Black PN 94223
  • Product Type: Auto Accessory
  • Package Quantity: 1
  • Product Dimensions: 7.594 cms (L) x 21.793 cms (W) x 22.910 cms (H)
  • Country Of Origin: United States
SaleNo. 2
Valterra White Gravity Fresh Water Fill Hatch Inlet RV Trailer
2,687 Reviews
Valterra White Gravity Fresh Water Fill Hatch Inlet RV Trailer
  • Parts are constructed with UV stabilized Plastic
  • Bayonet style cap
  • 1/2" air vent for faster fill rates
  • 1 1/4" barn connection
  • 4.5" Wide and fits a 3.5" cut out
SaleNo. 3
Valterra A0170SVP 3/4" Water Inlet Plug with Strap - White (Carded)
  • Dust plug and strap
  • Protects your fresh water system from dust and insects
  • Plug Size: 3/4"
  • Color: White

Conclusion

We hope this ranking has been helpful to you in picking the RV Freshwater Tanks Inlets that best suits you. We made it thoroughly and we will update it just as seriously, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, and get an overview of the current market offers. We are here to make it easier for you and to help you make a free and informed choice. If our ranking gave you a clearer view on the diversity of the RV Freshwater Tanks Inlets, feel free to let us know in the comments section. We will happily read them.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2022-05-22 at 07:11 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment