Where to get Trailer Hubs Spindles – December 2021 edition

Looking to find the best Trailer Hubs Spindles?

We researched 25 Trailer Hubs Spindles, tested 15, and we have done 14 hours of research. The best Trailer Hubs Spindles doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap; comes as shown in the first image
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles"

Intro

Find out where you can get the best Trailer Hubs Spindles! Picking among different existing Trailer Hubs Spindles is not always that easy. It can even turn into a lengthy task because of the multiplicity of websites offering this type of product. That’s why on this page we’re giving you a comparison based on the best value for money spent. It’s a ranking thoroughly made to provide you with a comprehensive view and allow you to pick the best Trailer Hubs Spindles. You will find a broad selection of models, brands, and prices. Whether you want to spare your wallet or find out what will be the best Trailer Hubs Spindles for you, we support you through this comparison, which lists the product based on Amazon customer reviews. To make it practical, we have laid it out as a Top 10 of the Trailer Hubs Spindles. On your marks! Start comparing! Pick your Trailer Hubs Spindles!

Our picks

No. 1
The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap; comes as shown in the first image
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles"
No. 2
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 5-4.5" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 14 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Trailer Hubs Spindles information.
As for me, I’m very familiar with the Trailer Hubs Spindles since I got it from 5 years.

Top 10

No. 1
The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap; comes as shown in the first image
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles"
No. 2
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 5-4.5" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
No. 4
Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKSQ-2200545) Includes (2) Square Shaft 1-1/16 Inch Straight Spindles & Bearings
  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins.
  • Bearings included - (4) L-44649 1-1/16" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub)
  • Spindles feature a 1-1/2" SQUARE stock diameter with a bearing surface of 1-1/16 inch.
No. 5
The ROP Shop (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap; comes as shown in the first image
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles"
No. 6
Tie Down Engineering 5-Lug Hub/Spindle End Unit for Build your own Trailer Axle System - 1750-Lb. Capacity Per Hub, Model Number 80117
  • 5-lug hub/spindle end unit
  • Fits 2in. x 2in. tube (Item# 124997) and spindle/flange set (Item# 124994)
  • Sold individually, 2 end units required per axle
  • Includes brake flange
No. 7
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4' Bolt Circle Hub
123 Reviews
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4" Bolt Circle Hub
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 4-4" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
No. 8
Rigid Hitch Trailer Hub Kit (BT-100-F) 4 Bolt on 4 Inch Circle - Fits 1" and 1-1/16" Spindle
  • Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts
  • Fits both 1" and 1-1/16" diameter straight spindles
  • Hub measures 4-1/4 inches tall (through center of hub)
  • 2,000 lb capacity - 1/2-20 thread - 4 bolt on 4 inch bolt circle
No. 9
SOUTHWEST WHEEL 4-Hole, 4" Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) for 1" Spindle
  • 4 studs 4" bolt circle using TruRyde L44643 inner and outer bearings.
  • Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts.
  • Fits a BT8 Spindle (1" OD)
  • TruRyde Hubs are pre-raced & all studs are 1/2"-20 with yellow finished zinc plating.
  • TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
No. 10
CE Smith Trailer Nut 1" Washers & Cotter Pins Spindle
  • Two 1 inch shaft spindle nuts
  • Two 1 inch shaft washers
  • Two 1-3/4 inch long cotter pins
  • Sold in pairs

How we tested

We search all the field to find the best Trailer Hubs Spindles and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Trailer Hubs Spindles from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Trailer Hubs Spindles and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Trailer Hubs Spindles from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16" Straight Spindle 2000lbs Axles- 22016K
  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed
  • Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread
  • pls noted, this hub fit straight spindles, not for tapered spindles

Conclusion

We hope this ranking has been helpful to you in picking the Trailer Hubs Spindles that best suits you. We made it thoroughly and we will update it just as seriously, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, and get an overview of the current market offers. We are here to make it easier for you and to help you make a free and informed choice. If our ranking gave you a clearer view on the diversity of the Trailer Hubs Spindles, feel free to let us know in the comments section. We will happily read them.

Click to rate this post!
[Total: 0 Average: 0]

Last update on 2021-12-01 at 00:11 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment